Last Updated on July 28, 2020 by Atiqul Islam
Introduction
A faulty loud pipe might take life rather than saving one. Just like any other part of the exhaust system, the header is an element that helps your exhaust system to operate to its fullest.
If you’re facing any difficulty with your exhaust header, you might want to install a new one just in case. So, you might be wondering how to install headers.
Well, we’re going to help you install the headers today. We’ve got these easy steps that you’ll need to follow in order to install the headers.
So, if you don’t want to damage your ride and install fresh headers, follow the sequentially. So, without further delay let’s get right into in-
What’s a Header?
There’s a part of your exhaust system that improves performance by providing a less restrictive part for exhaust gases. That’s the header.
The header releases additional power for your ride. It can also help you to improve your fuel economy by its more efficient exhaust gas flow.
However, your exhaust headers are especially effective when other airflow enhancements are added like a cool air intake system.
How to Install Headers
Here are the steps to installing your exhaust header that we were talking about-
Step 1: Unpack Everything
You need to unpack the new header and check out all the new hardware and implements that you have in there.
Make sure that you have everything that you need in the pack that comes with the header.
Step 2: Unplug the Electrical Parts
You should disconnect your negative battery terminal and also unplug the electrical oxygen sensors. It’s for your own safety so that you don’t get electrocuted.
Step 3: Remove the Mid-Pipe
You need to unbolt your exhaust’s mid-pipe from your stock manifold. Make sure that you remove it COMPLETELY. Now, install the new header. But as it is heavy, you need to be really cautious while you do it.
Step 4: Disconnect All Hardware and Equipment
You need to disconnect any hardware and equipment that stops you from properly accessing your manifold.
Your spark plugs can be removed and alternators can be placed out of the way. Also, keep in mind that you need to remember where every plug or connection goes. Or else it’s going to be a huge mess for you.
Step 5: Remove the Manifold
Now, you need to unbolt and remove your manifold. You see, often you might need to unbolt both from above and below.
On the other hand, you might need to unbolt from both the driver’s and passenger’s sides. Also, as your engine comes together, you’ll need to access your manifold and unbolt it from two different vantage points.
Conclusion
So, now you know how to install headers of your beautiful ride. Also, you’re now more than able to install the header on your car yourself.
However, if anything ever goes wrong, remember that the professionals are just one call away from you. It’s always a better option to seek help from a professional who is an expert at this.
So, aren’t you excited to do a little experiment on your ride?